SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

CATA E-100 GTH BK ventilátor, 4/8W, automatikus, o100mm, fekete (00900602)

Ajánlott fogyasztói ár ÁFÁ-val	52 000 Ft /db
Megtakarítás	0,0 %
Az Ön ára ÁFA nélkül	40 945 Ft /db
Az Ön ára ÁFA-val	52 000 Ft /db
ÁFA	27%

Cseh készleten > 10 db

Ajánljuk hozzá

1x	CATA Visszacsapószelep o100mm, X-Mart 10 (Matic) / E-100 / B-10 Plus

Márkanév	Cata
Széria	VENTILÁTOR E
Rendelési kód	00900602
Garancia	24 hónap
Súly	1,15 kg
Szín	Fekete
Csomag	1 db
Átmérőpotrubi	100 mm
Teljesítmény	115 m3/óra
Zajszint	31 dB
Kivitel	Időzítő; Automatikus páratartalom
Méret	150x150x94 mm
Alapanyag	PVC-Üveg
Védelmi Besorolás	IP44
Feszültség	230 V
Teljesítmény	8 W
Jótállás	2 év

Axial fan with HYGRO equipment

The E-100GBTH fan has two speeds, at the lower speed it runs continuously all day and ventilates the room. If necessary (at the instigation of the built-in humidity sensor or on the basis of an impulse from an external switch), the speed will increase and after ventilation it will automatically decrease again - controlled by a microprocessor.

Adjustable humidity sensor - from 40 to 90%
Adjustable electronic timer from 0 to 15 minutes
Elegant glass front panel
The board is illuminated by a blue LED display showing the current temperature and current relative humidity (in the given room)
Permanently prevents the formation of mold (recommended wherever plastic windows have been installed)
Low consumption - 4 W (continuous operation), 8 W (full speed)
Ultra-quiet - 17dB (continuous), 31dB (full speed)
Easy installation without the use of screws
Output - 36 m3/h (continuous operation), 115 m3/h (full output)
The motor has ball bearings
Non-return valve for additional purchase, not included in the package

All models with HYGRO also include a TIMER function - they have a separate terminal for independent switching on of the fan regardless of the set humidity. After applying a phase (button, switch or thermostat) to this terminal, the fan starts up, after disconnecting the phase and after the set time has elapsed, the fan goes into automatic humidity monitoring mode.

Top design

The intake suction, which is popular with kitchen hoods, also gets into bathrooms and toilets (the pipe noise does not flow directly through the fan into the room, but it strikes the front plate, part is bounced back and only a small part radiates to the side - has a beneficial effect on noise reduction )
Wall and ceiling installation
For E-100,120,150 GTH, E-100 GSTH and E-100 GBTH, the board is backlit by a blue illuminated display showing the current temperature and relative humidity (in the room)

Easy cleaning

No more gridded dust
The glass front panel can be easily rotated, washed under running water and mounted back

In the range of 3 fan variants:

STANDARD - activation by external switch in room (marking G)
TIMER - adjustable electronic timer from 3 to 15 minutes (GT designation)
HYGRO - adjustable humidity sensor - from 40 to 90%. Adjustable electronic timer from 3 to 15 minutes. Display with thermometer and hygrometer (GTH).