SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

BARRICA dlažba Nuez 19,4x120 (bal=1,4m2) (BAR002)

Ajánlott fogyasztói ár ÁFÁ-val	Feltöltés alatt
	Feltöltés alatt
Az Ön ára ÁFA nélkül	Feltöltés alatt
Az Ön ára ÁFA-val	Feltöltés alatt
ÁFA	27%

Cseh készleten > 10 m²

Márkanév	Azteca
Széria	BARRICA
Rendelési kód	BAR002
Garancia	24 hónap
Súly	25,02 kg
Csomag	1 db
Karakter	Kalibrált; Szinterezett; Fagyálló
Kopásállóság	PEI IV
Elhelyezés	Csempe;Burkolat
Méret	19,4x120 cm
Felület	Matt
Pocet Ks V Csomag	6
Alapanyag	Kerámia
Tloustka	10.3 mm
Csomag Tartalma	1.4 m²
Jótállás	2 év
Hodnota Protiskluzu	R10

Rectified tiles

Rectified tiles are also known as dimensionally stable tiles. These are tiles that have been mechanically trimmed to a certain size after they have been fired so that their edges are 90°. Achieved uniform size, consistency and optimum precision give the tile a cleaner finish and fewer deviations between tiles.

Porcelain tiles

By pushing into the mold under high pressure remains in the ceramics minimum of air bubbles. It is then fired at high temperatures, making the final product hard, strong and abrasion resistant. At the same time, it is less absorbent. Located universal use in interior and exterior, on walls and floors. Sintered paving is especially suited to high-stressed areas such as tiles or building facades.

Frost resistance

Frost resistance is determined by the degree of water absorption of the tile (ie it does not provide water to freeze it). For tiles for indoor use is not required frost resistance and moisture absorption is usually more than 10 %. In contrast, frost-resistant glazed tiles have an absorption of up to 3 %. For exterior are suitable sintered tiles with water absorption below 0.5 %.

Use of glazed tiles by abrasion resistance:

Class PEI IV. - designed for busy foot traffic and stronger pollution, eg. Interiors of administrative buildings, hotel corridors, business rooms and offices.

Anti-Slip Rate

The slip resistance value is determined by the slip level on the inclined surface and is approved in most countries. According to the slip angle, they are classified into five classes with suitability for use in specific areas for the safe movement of persons.

R10: Slip angle from 10° to 19°
Suitable for cloakrooms, packaged food stores, garages, warehouses, toilets in schools.